FeudalTools Forums

So i've done the refresh and the server has taken nearly an hour to get to this point

WARN 2019-01-04 11:34:27.298 {02} <createWorld> [0] DB::RS(0 ms) select case when exists(select * from items i join movable_objects mo on mo.RootContainerID=i.ContainerID where mo.ID=93106) then 1 else 0 end as haveItems;
WARN 2019-01-04 11:34:27.361 {02} <createWorld> [0] DB::RS(1 ms) select ID, ObjectTypeID from `movable_objects` where CarrierMovableID = 93769;
WARN 2019-01-04 11:34:27.417 {02} <createWorld> [0] DB::RS(0 ms) select case when exists(select * from items i join movable_objects mo on mo.RootContainerID=i.ContainerID where mo.ID=97027) then 1 else 0 end as haveItems;
WARN 2019-01-04 11:34:27.419 {02} <createWorld> [0] DB::RS(1 ms) select case when exists(select * from items i join movable_objects mo on mo.RootContainerID=i.ContainerID where mo.ID=97030) then 1 else 0 end as haveItems;
WARN 2019-01-04 11:34:27.492 {02} <createWorld> [0] DB::RS(3 ms) SELECT m.ID, m.CarrierCharacterID, m.ObjectTypeID, c.GeoID, c.GeoAlt FROM movable_objects m JOIN `character` c ON c.ID=m.CarrierCharacterID AND c.GeoID>=117964800 AND c.GeoID<118226944;
ECHO 2019-01-04 11:34:27.493 {02} <createWorld> [0] _attachTerrain: 450, server
ECHO 2019-01-04 11:34:27.494 {02} <createWorld> [0] nav mesh loading: data/navMeshes/nm1.nmesh
INFO 2019-01-04 11:34:27.529 {02} <createWorld> [0] nav mesh loaded in 0.035 sec from: data/navMeshes/nm1.nmesh
ECHO 2019-01-04 11:34:27.529 {02} <createWorld> [0] applying 683664 geo changes of ter#442 to navMesh#1650

Now itll sometimes progress but itll take a few minutes to get going, i havent got past applying changes to ter#443 yet

Is this normal?

Also the server will stop running when it gets to that point as well after hanging for a few minutes

Just did it again


ECHO 2019-01-04 11:41:04.235 {02} <createWorld> [0] applying 9584 obj changes of ter#442 to navMesh#1650

ECHO 2019-01-04 11:41:07.958 {02} <createWorld> [0] applying 3209 forest changes of ter#442 to navMesh#1650

ECHO 2019-01-04 11:41:09.814 {02} <createWorld> [0] applying 636265 geo changes of ter#443 to navMesh#1650



ECHO 2019-01-04 11:41:58.048 {} <> [0] --------- Loading DIRS ---------

INFO 2019-01-04 11:41:58.048 {} <> [0] vyo_1.4.4.5

ECHO 2019-01-04 11:41:58.049 {} <> [0]

ECHO 2019-01-04 11:41:58.110 {01} <onStart> [0]
--------- Initializing Directory: scripts ---------

after this the server will just stop from what ive got so far

This is normal, you just have to wait much longer for the first startup.
It can take 10 minutes or like 3 hours. Depends on server CPU speed and load. With a slow server hardware you have to wait longer.

yes but is it normal for the server to go to PID of 0 (in essence full shutdown) when it reaches this point? i have since done a restore and im now just trying to gather info for my next attempt.

Not sure what you mean. As long as the server console is open and the process is causing a significant CPU load, everything is fine.

Figured out what it was for people also having this issue

In essence, the server provider was throttling the CPU when it started to load all the geo_patch changes to the navmesh, the only way to get around this is to purchase high CPU priority or have your providers do it for you.

can you say what provider/hoster you are using? This will be a valuable information for their other customers I'm sure.

Yeah it was PingPerfect, granted at the time i didnt know the person i was developing for didnt have high CPU priority / extra RAM. So make sure if you do use them to get the high CPU priority and extra RAM usage for the custom maps.

Found out some more info, make sure you use 6gb+ of RAM, thats what it took to get a full DB restore and eventually a full map refresh, i'd be on the cautious side and get more than 6 but right now 6 seems to be working.